SERIES MARK II

3% Accuracy for Stationary and Portable Applications

SERIES Mark II Molded Manometers are of the inclined and inclined-vertical

types. The curved inclined-vertical tube of the Model 25 gage provides higher

ranges with more easily read increments at low readings. The Model 25 is

excellent for general purpose work. The Model 40 inclined gage provides linear

calibration and excellent resolution throughout its range. The Model 40 is ideally

suited for air velocity and air filter gage applications. Both gage types are capable

of pressure measurements above and below atmospheric as well as differential

pressure measurements.

Specifications

Accuracy : ±3% FS.

Temperature Limits : Inclined/Vertical Models: 140°F (60°C); Inclined Models: 150°F (65°C).

Pressure Limits : Inclined/Vertical Models: 10 psi (70 kPa); Inclined Models: 15 psi (100 kPa).

Scale Length : Inclined Models: Approx. 8-1/4" (21 cm).

Weight : Inclined/Vertical Models: 1.04 lb (472 g); Inclined Models: 1.23 lb (558 g).

Features

• Broad ranging in easy to read calibrated increments
• Gages ideally suited for general measurements and specific air applications
• Compact, stationary or portable device, make it a simple to use tool for pressure measurement in OEM or user applications
• Construction - Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. Portable stand is standard on Model 40, available as optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof "O" ring seals. Moderate overpressures are accommodated by an overflow tank incorporated in the Model 25. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.
• Installation - Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.
• Accessories - Included with each Mark II manometer are two tubing connectors for 1/8" pipe or sheet metal ducts, two mounting screws, 1 ounce bottle of indicating fluid, red and green pointer flags and complete instructions.
  The Model 25 also includes 8' of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage fluid in transit.
  The Model 40 contains two 4-1/2' lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.

Options

• OEM Specials - All Dwyer® Mark II Molded Plastic Manometers can be supplied in OEM quantities with your name and special graphics and scale.

Models & Ordering

CATALOG  SERIES  MARK  II  (CLICK  HERE!)

ACCESSORIES  SERIES  MARK  II  (CLICK  HERE!)